Panasonic PV-GS180 User Manual

Edit mode

LSQT0973

Audio dubbing

You can add music or narration to the recorded
cassette.
≥Set to Tape Playback Mode.

Insert an external microphone securely into
the [MIC] terminal as far as it will go.

Find a scene that you want to add sound to,
and press the [

;] button on the remote

control.

Press the [AUDIO DUB] button on the
remote control to make audio dubbing
ready.

Press the [

;] button on the remote control

to start audio dubbing.

≥Talk into the microphone.

Press the [

;] button on the remote control

to stop audio dubbing.

≥If a tape has a non-recorded portion when the

tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.

Before recording with audio dubbing

≥Set to Tape Recording Mode.
≥When you want to preserve the original sound

taken during recording, set [SETUP] >>
[AUDIO REC] >> [12bit] to take pictures. (When
set [16bit], the sounds taken during recording
are erased after recording with audio dubbing.)

≥Set [BASIC] >> [REC SPEED] >> [SP] to take

pictures.

To play back the sound recorded with
audio dubbing

You can switch between the sound recorded with
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by

audio dubbing.

[MIX]:

It simultaneously plays back the original
sound and the sound added with audio
dubbing.

To dub audio while listening to a
pre-recorded sound

≥When pausing the audio dubbing, set the

[12bit AUDIO] on the [SETUP] Sub-Menu to
[ST2] and you can check the pre-recorded
sound.

CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.

MIC

;

A.DUB

;

A.DUB

LSQT0973ENG.book 47 ページ２００６年１月３０日　月曜日　午前１１時４０分