Panasonic AG-HPX600EJ User Manual

– 128 –

TEST TONE

Selects test signals.
[NORMAL]

Outputs the test tone to CH1/CH2/CH3/CH4 when the 

<OUTPUT>/<AUTO KNEE> selector switch is set to <BARS>, 

and audio channel 1 is set to [FRONT] at the [IN] item on the 

[AUD02:INPUT] screen of SmartUI.

Always outputs the test tone to CH1/CH2/CH3/CH4 when the 

<OUTPUT>/<AUTO KNEE> selector switch is set to <BARS>.

Outputs the test tone to the channel where the [IN] item on the 

[AUD02:INPUT] screen of SmartUI is set to [FRONT] when the 

<OUTPUT>/<AUTO KNEE> selector switch is set to <BARS>. 

(Does not output to CH3/CH4.)

Does not output the test tone.

F.MIC POWER

Sets the phantom power of front microphone.

F.MIC LEVEL

Selects the front microphone input level.

[−40dB], [−50dB], [−60dB]

R.MIC CH1 LEVEL

Selects the rear microphone CH1 input level.

[−50dB], [−60dB]

R.MIC CH2 LEVEL

Selects the rear microphone CH2 input level.

[−50dB], [−60dB]

HEADROOM

Sets the headroom (standard level).

 

f

The factory settings may differ depending on the 

region.
(AG-HPX600P: [20dB], AG-HPX600EJ: [18dB], 

AG-HPX600EN: [18dB])

WIRELESS WARN

Sets whether to issue a warning when the reception status of the wireless receiver 

is poor.

WIRELESS TYPE

Selects the type of wireless receiver.
[SINGLE]

Single channel type

Dual channel type

 

f

If a single channel type wireless receiver is mounted when [DUAL] is selected, 

no sound is recorded even if CH2 and CH4 are set to [W.L.].

         indicates factory setting values.

*  Frequency response when the microphone low cut filter is used is between 200 Hz to 10 kHz.

SDI OUT

Sets the video output from the <SDI OUT/IN (OP)> terminal.
[ON]

Outputs video from the output.

Does not output video from the output.

SDI OUT CHAR

Selects whether to superimpose characters to [SDI OUT].

 

f

When the [SYSTEM MODE] item is 

[1080-23.98PsF], characters are not 

superimposed to the video of [SDI OUT], and this 

item is not displayed.

Superimposes characters.

Does not superimpose characters.

SDI METADATA

Sets superimposition of [SDI OUT] metadata (UMID).
[ON]

Superimposes metadata.

Does not superimpose metadata.

SDI EDH

Sets superimposition of EDH when [SDI OUT] is the SD signal (480i and 576i).
[ON]

Superimposes EDH.

Does not superimpose EDH.

HD SDI REMOTE

Sets whether to use the recording control function for external devices (such as 

recorders) connected to the <SDI OUT/IN (OP)> terminal or the <MON OUT> 

terminal. (For HD SDI signal output)

 

f

The recording control is output to external devices 

when set the item to [ON]. While recording is 

being executed, lamps such as the REC lamp, 

front tally lamp, and back tally lamp on the 

viewfinder, and the tally lamp on the camera are 

illuminated.

 

f

The recording control is not output while interval 

recording and loop recording.

 

f

For supported external devices (such as 

recorders), visit the following website:
http://panasonic.biz/sav/autorec_e/
The recording control status is displayed on the 

Controls recording operations of external devices.

Does not control recording operations of external devices.

         indicates factory setting values.