Panasonic AG-HPX600EJ User Manual

– 129 –

AUTO REC (OP2)

Selects the function that automatically starts or stops recording by detecting 

REC START/STOP mark from the frame rate information of user bits added to the 

HD SDI input signal in HD mode.

 

f

Set the user bits added to the HD SDI signal at 

the output device of the HD SDI signal as the 

frame rate. For setting procedure, refer to the 

operating instruction of the output device.

 

f

Set the [REC SIGNAL] item to [SDI IN], and input 

the HD SDI signal to the <SDI OUT/IN (OP)> 

terminal.

 

f

For frame rate information of the user bits, refer to 

Performs automatic recording by detecting from LTC of the HD 

SDI input signal.

Performs automatic recording by detecting from VITC of the HD 

SDI input signal.

Does not perform automatic recording.

MON/HDMI ZEBRA

Selects whether the zebra pattern is superimposed over the output signals from 

the <MON OUT>, <HDMI>, and <REMOTE> terminals. (The remote VBS signal 

also interlocks.)

 

f

This setting interlocks with the setting of [ZBR] 

on the [SET03:MON/HDMI SETUP] screen of 

SmartUI.

Superimposes zebra patterns.

Does not superimpose zebra patterns.

TC IN/OUT SEL

Selects whether to use the <TC IN/OUT> terminal in TC IN or TC OUT.
[TC OUT]

Uses TC OUT.

Uses TC IN.

TC OUT

Sets the time code type output from the <TC IN/OUT> terminal.
[TCG]

Always outputs the time code generator value of the camera.

Outputs the time code generator value when outputting 

camera images, and outputs the played time code value when 

outputting playback images.

TC VIDEO SYNC

Sets the output delay of time code output from the <TC IN/OUT> terminal.
[RECORDING] Outputs TCG to be recorded without delay.
[VIDEO OUT]

Outputs images according to the delay of output images from 

the <MON OUT> and <SDI OUT/IN (OP)> terminals.

         indicates factory setting values.

EVF PEAK LEVEL

Adjusts the peaking level of the viewfinder screen.

[−7] ... [0] ... [+7]

EVF PEAK FREQ

Adjusts the peaking frequency of the viewfinder screen.
[LOW]

Sets the peaking frequency lower.

Sets the peaking frequency higher.

EVF TYPE

Selects the type of viewfinder to be connected.
[COLOR]

Connects the color viewfinder. (AJ-CVF100G, AG-CVF10G)

Connects the black and white viewfinder. (AJ-HVF21KG)

EVF COLOR

Selects whether to display viewfinder images in color or in black and white.

 

f

This setting is not available when the [EVF TYPE] 

item is set to [B/W].

Displays in color.

Displays in black and white.

ZEBRA1 DETECT

Sets the level of zebra pattern 1 tilting to the right.

ZEBRA2 DETECT

Sets the level of zebra pattern 2 tilting to the left.

ZEBRA2

MARKER

Sets on/off of the center marker displayed on the viewfinder screen. (page 81)

SAFETY ZONE

 

f

When the [SYSTEM MODE] item is set to 

[480-59.94i] or [576-50i], and the [ASPECT 

CONV] item is set to [SIDE CROP] and [LETTER 

BOX], the safety zone is not displayed even when 

[4:3], [13:9], or [14:9] is selected.

FOCUS BAR

Sets the function to indicate the focus level with bar size.

 

f

It is not interlocked with the focus assist button.

Displays the focus bar.

Does not display the focus bar.

DATE/TIME

Sets the date and time display.
[TIME]

Displays hour, minute, and second.

Displays year, month, and day.

Displays hour, minute, second as well as year, month and day.

Does not display.

LEVEL METER

Sets the audio level meter display.

         indicates factory setting values.