Panasonic HDC-DX1PC User Manual

Page of 144
33
LSQT1093
Setup
≥The recordable times will vary depending on 
the status of use. These times are 
approximations.
The recordable time will become shorter in the 
following cases:
– When you use both the viewfinder and the 
LCD monitor simultaneously while rotating 
the LCD monitor frontward to record yourself, 
using the 0 Lux MagicPix function, etc.
– When you use this unit with the LCD monitor 
lit up by pressing the POWER LCD button.
≥The batteries heat up after use or charging. 
This unit will also heat up while being used. 
This is not a malfunction.
≥Be aware that the operating time of the battery 
will become shorter in low temperatures. We 
recommend charging a spare battery for use 
when recording.
ª About the remaining battery 
capacity indication
The remaining battery capacity is displayed in 
minutes when using the Panasonic battery that 
you can use for this unit. It may take time to 
display the remaining battery capacity.
≥The display changes as the battery capacity 
reduces. 
#
#
#
#
.
If there is less than 3 minutes remaining, then 
 will become red. If the battery 
discharges, then 
 
will flash.
≥The remaining battery capacity may not be 
displayed correctly where the temperature is 
low or high or if the battery was not used for a 
long period of time.
To correctly display the remaining battery 
capacity, recharge the battery, discharge it and 
then charge it again. (Even if this operation is 
performed, it may not be possible to display the 
remaining battery capacity correctly if the 
battery was used for a long period of time 
where the temperature is low or high or if the 
battery was repeatedly charged.)
≥The maximum amount of remaining battery 
capacity able to be indicated is 240 minutes. If 
the actual remaining time exceeds 
240 minutes, the indication will stay green and 
will not change until the remaining time falls 
below 240 minutes. 
≥Depending on the conditions of use, the time 
displayed on the remaining battery capacity 
indication will change so use it as an 
approximation.
≥When turning the mode dial to switch modes, 
the time indication will turn off in order to 
recalculate the remaining battery capacity time.
≥When using batteries made by other 
companies the remaining battery capacity will 
not be shown. 
Connecting to the AC outlet
1
Connect the AC cable to the AC 
adaptor and the AC outlet.
2
Connect the DC cable to the AC 
adaptor.
3
Connect the DC cable to the DC 
input terminal DC IN 7.3V.
≥Do not use the AC cable with any other 
equipment as it is designed only for this 
unit. Do not use the AC cable from other 
equipment with this unit.
≥While the DC cable is connected to the AC 
adaptor, the battery will not charge.
90min
LSQT1093ENG.book  33 ページ  2007年1月15日 月曜日 午前9時23分