Sony DCR-TRV9 User Manual

If the camcorder is brought directly from a cold place to a warm place, moisture may
condense inside the camcorder, on the surface of the tape, or on the lens.  In this condition,
the tape may stick to the head drum and be damaged or the camcorder may not operate
correctly.  To prevent possible damage under these circumstances, the camcorder is
furnished with moisture sensors.  Take the following precautions.

If there is moisture inside the camcorder, the beep sounds and the {

 indicator flashes.  If this

happens, none of the function except cassette ejection will work.  Open the cassette
compartment, turn off the camcorder, and leave it about 1 hour.  When 6 indicator flashes at
the same time, the cassette is inserted in the camcorder.  Eject the cassette, turn off the
camcorder, and leave also the cassette about 1 hour.

If moisture condenses on the lens, no indicator appears, but the picture becomes dim.  Turn
off the power and do not use the camcorder for about 1 hour.

When bringing the camcorder from a cold place to a warm place, put the camcorder in a
plastic bag and allow it to adapt to room conditions over a period of time.

(1) Be sure to tightly seal the plastic bag containing the camcorder.
(2) Remove the bag when the air temperature inside it has reached the temperature

surrounding it (after about 1 hour).

To ensure normal recording and clear pictures, clean the video heads.
The video heads may be dirty when:
• mosaic-pattern noise appears on the playback picture
• playback pictures do not move
• playback pictures are hardly visible
• playback pictures do not appear
• the v indicator and “ Ò CLEANING CASSETTE” message appear one after another or

the v indicator flashes on the LCD screen or in the viewfinder

If [a] or [b] happens, clean the video heads with the Sony DVM12CL cleaning cassette (not
supplied).  Check the picture and if the above problem persists, repeat the cleaning.  (Do not
repeat cleaning more than 5 times in one session.)

or