Sony DCR-TRV9 User Manual

Charging
• Use only an “InfoLITHIUM” type battery pack.
• Place the battery pack on a flat surface without vibration during charging.
• The battery pack will get hot during charging.  This is normal.

Others
• Unplug the unit from the wall outlet when not in use for a long time.  To disconnect the

power cord, pull it out by the plug.  Never pull the cord itself.

• Do not operate the unit with a damaged cord or if the unit has been dropped or damaged.
• Do not bend the AC power cord forcibly, or put a heavy object on it.  This will damage the

cord and may cause a fire or an electrical shock.

• Be sure that nothing metallic comes into contact with the metal parts of the connecting

plate.  If this happens, a short may occur and the unit may be damaged.

• Always keep the metal contacts clean.
• Do not disassemble the unit.
• Do not apply mechanical shock or drop the unit.
• While the unit is in use, particularly during charging, keep it away from AM receivers and

video equipment because it will disturb AM reception and video operation.

• The unit becomes warm while in use.  This is normal.
• Do not place the unit in locations that are:

Extremely hot or cold, Dusty or dirty, Very humid, Vibrating

To avoid possible damage from battery leakage or corrosion, observe the following.
• Be sure to insert the batteries in the correct direction.
• Dry batteries are not rechargeable.
• Do not use a combination of new and old batteries.
• Do not use different types of batteries.
• The batteries slowly discharge while not in use.
• Do not use a battery that is leaking.

If battery leakage occurred
• Wipe off the liquid in the battery case carefully before replacing the batteries.
• If you touch the liquid, wash it off with water.
• If the liquid get into your eyes, wash your eyes with a lot of water and then consult a

doctor.

If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.