Pelco FR106011 User Manual
C2649M (9/07)
19
Figure 7. FT106011 Transmitter/FR106011 Receiver Connections
Table C. Contact Closure Pin Assignments
Pin Number
Contact Closure (CC)
1
In, Common
2
In
3 or 4
Out, Common
5
Out, Normally Open
6
Out, Normally Closed
FIBER OPTIC CABLE
COAXIAL CABLE
PIN 2
PIN 1
PIN 11
PIN 12
CONTACT CLOSURE, DATA, AND
AUDIO COMMUNICATIONS
CABLES (REFER TO TABLES C, D,
AND E FOR CONNECTOR PIN
ASSIGNMENTS AND TO
FIGURES 8-17 FOR WIRING
DIAGRAMS)
AUDIO COMMUNICATIONS
CABLES (REFER TO TABLES C, D,
AND E FOR CONNECTOR PIN
ASSIGNMENTS AND TO
FIGURES 8-17 FOR WIRING
DIAGRAMS)
POWER CONNECTION
FOR STANDALONE MODULE
FOR STANDALONE MODULE
POWER/ALARM CONNECTION
FOR RACK-MOUNTED MODULE
FOR RACK-MOUNTED MODULE
TO INSERT OR REMOVE A WIRE,
DO THE FOLLOWING:
DO THE FOLLOWING:
1. USING THE SUPPLIED
SCREWDRIVER, PRESS DOWN
ON THE APPROPRIATE CLAMP
UNTIL THE SCREWDRIVER IS
FIRMLY SEATED IN THE SLOT.
2. INSERT THE WIRE INTO OR
REMOVE THE WIRE FROM THE
ASSOCIATED PIN.
3. REMOVE THE SCREWDRIVER.
SCREWDRIVER, PRESS DOWN
ON THE APPROPRIATE CLAMP
UNTIL THE SCREWDRIVER IS
FIRMLY SEATED IN THE SLOT.
2. INSERT THE WIRE INTO OR
REMOVE THE WIRE FROM THE
ASSOCIATED PIN.
3. REMOVE THE SCREWDRIVER.