Sony DCR-TRV320 Manual
59
Editing
Using with analog video unit and PC
– Signal convert function
– Signal convert function
You can capture images and sound from an analog video unit connecting a PC which
has the i. LINK (DV) jack to your camcorder.
has the i. LINK (DV) jack to your camcorder.
Analog video signals t Digital video signals
(1) Set the POWER switch to VTR.
(2) Set A/V t DV OUT to ON in the menu settings. (P. 64)
(3) Start playback on the analog video unit.
(4) Start capturing procedures on your PC.
(2) Set A/V t DV OUT to ON in the menu settings. (P. 64)
(3) Start playback on the analog video unit.
(4) Start capturing procedures on your PC.
The operation procedures depend on your PC and the software which you use.
For details on how to capture images, refer to the instruction manual of the
software.
For details on how to capture images, refer to the instruction manual of the
software.
After capturing images and sound
Stop capturing procedures on your PC, and stop the playback on the analog video unit.
Notes
•You need to install software which can exchange video signals.
•Depending on the condition of the analog video signals, the PC may not be able to
•You need to install software which can exchange video signals.
•Depending on the condition of the analog video signals, the PC may not be able to
output the images correctly when you convert analog video signals into digital video
signals via your camcorder. Depending on the analog video unit, the image may
contain noise or incorrect colors.
signals via your camcorder. Depending on the analog video unit, the image may
contain noise or incorrect colors.
•You cannot record or capture the video output via your camcorder when the video
includes copyright protection signals such as ID-2 system.
DV
VIDEO
AUDIO
S VIDEO
IN
AUDIO / VIDEO
DV IN/OUT
: Signal flow
(not supplied)
VIDEO
AUDIO