Sony 510P User Manual

Cha

p

te

r 4  

 Sc

en
e Sele

c

tion

71

4-3 Clip List Operations

The sub clip deletion screen appears.

To cancel the deletion, and escape from the sub clip 
deletion screen
Do either of the following.
• Select CANCEL, and press the SEL/SET dial or the 

MENU knob.

• Press the RESET button.
The screen returns to the sub clip thumbnail display.

Use the SEL/SET dial or the MENU knob to select 
OK, and press the dial/knob.

This deletes the sub clip, and the screen returns to the 
sub clip thumbnail display.

The operations described above (moving, trimming, and 
deleting sub clips) are carried out on the current clip list.
Execute the procedure in 4-3-2 “Saving the Current Clip 
List to Disc” (page 71) to save the current clip list to disc 
again as a clip list.

Unless the current clip list has been saved to disc, its 
contents will be lost when the camcorder is powered off or 
the disc is ejected. After creating a clip list, be sure to save 
it.

Proceed as follows.

The CLIP menu can handle up to 99 clip lists.

With the thumbnail indicator off, hold down the SHIFT 
button and press the SUB CLIP button.
The CLIP menu appears.

• If the MENU ON/OFF switch is set to ON, set it to OFF, 

then press the SUB CLIP button with the SHIFT button 
held down.

• If you set the MENU ON/OFF switch to ON while the 

CLIP menu is being displayed, thumbnail display is 
cancelled and replaced with menu display.

Use this menu to carry out the following operations.
• Save the current clip list to disc.
• Load a clip list on disc into the current clip list.
• Delete a clip list from disc.
• Clear the current clip list.
• Set the start time code of the current clip list.

Proceed as follows.

Use the SEL/SET dial or the MENU knob to select 
SAVE in the CLIP menu, and press the dial/knob.

A list of clip lists appears.
“NEW FILE” is shown for lists which do not exist on 
the disc, having names only.

     <CLIP MENU>

 LOAD

 SAVE

 DELETE

 CLEAR

 TC PRESET