Hasselblad 3034216 User Manual

Language

1. Press the MENU button to open the menu.

2. Use  and  to select the SETTINGS sub-menu.

3. Press  to open the SETTINGS menu.

4. Press  to select the USER INTERFACE sub-menu.

5. Press either the

button to choose a new language

(in this case Japanese).

6. Press the MENU/EXIT button again to close the menu.

ISO

You are able to set the light sensitivity of the digital back to match

an equivalent ISO rating for standard ﬁlm. The light meter inside

the camera body will use this setting when making automatic

exposure calculations for aperture and/or shutter settings.
The ISO rating can be set to 50, 100, 200 or 400.
To set the ISO:
1. Select the MAIN MENU > ISO entry. This is the top entry of

the top menu, so it will be selected by default when you enter
the menu system. (See also Navigating the Menu System for
details about how to ﬁnd this setting.)

2. Use the

button to step through the available ISO

settings until the setting you want is shown.

3. Either move on to another setting by using the navigator but-

ton or press the menu button to exit the menu system and
keep your setting.



Note that the default sensitivity of the CCD sensor is ISO 50.
Higher ISO settings result in progressively noisier images (just
as higher ISO ﬁlm becomes more grainy). It is recommended
that you use the lowest ISO setting possible for the lighting
situation.