Hasselblad 3034216 User Manual

White balance

Use this entry to set the white balance saved with the image and

applied to the preview.
To select a preset white balance:
1. Select the MAIN MENU > White Bal entry. The current

setting is displayed here. (See also Navigating the Menu
System for details about how to ﬁnd this setting.)

2. Use the

button to step through the available white

balance settings until the setting you want is shown.

3. Either move on to another setting by using the navigator but-

ton or press the menu button to exit the menu system and
keep your setting.



Please note that white balance settings are for your viewing
convenience only. The setting is temporary for preview display
reasons and in no way aﬀects the ﬁle which remains neutral
awaiting further processing.

Media

The storage setting controls where your digital back will store

new images and which stored images will be visible in the browse

window.
Often, you have just one type of storage media available—the

internal compact-ﬂash card. However, if you have several media

attached (e.g., a card and one or more external disks), then you

may need to switch between them.
If your selected storage medium has more than one batch (folder)

on it, then the batch selected when you use the storage menu entry

will be the one you most recently created.

To select the medium to which to save new shots and from which

to browse previous shots:
1.  Press the MENU button.
2.  Use  and  to select the MEDIA sub-menu.
3.  Use the

button to step through the available media

until the name for destination/source you wish to use is
shown.

4. Either move on to another setting by using the navigator but-

ton,

or:

4. Press the MENU button to exit the menu system and keep

your setting.



Note that you can also select media using just the (+) and (-)
buttons while browsing images. This method also enables
you to select a batch as you zoom in from media to batch to
thumbnails to preview. See Navigating Media and Batches

for complete details about this method.

Sensor unit Setting

Usage comments

Sunlight

For general outdoor use in direct sunlight.

Cloudy

For general outdoor use in cloudy weather.

Shadow

For general outdoor use in shady locations out of direct sunlight.

Flash

For general indoor use when using a typical ﬂash system.

Fluorescent

For use when using ﬂuorescent lighting.

Tungsten

For use when shooting indoors under standard tungsten lamps.

There are six ‘White Balance’ settings to choose from.