Panasonic DMP-BDT460 User Manual
33
SQT0080
Referen
ce
Cannot play.
¾
¾
You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
recorded in PAL video, etc.).
Cannot display on this unit.
¾
¾
You tried to play a non-compatible image.
¾
Re-insert the media.
No disc inserted.
¾
¾
The disc may be upside down.
$ This operation is not available.
¾
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
(For example, reverse slow motion, etc.)
IP address is not set.
¾
¾
The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾
is weak. It is recommended to change to a
stronger security setting.
¾
Set a stronger network security level referring
to the wireless router owner’s manuals.
to the wireless router owner’s manuals.
NET
¾
¾
While connecting to a network.
No PLAY
¾
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (> 27)
or DVD-Video. (> 27)
¾
The media is dirty or badly scratched. The
unit cannot play.
unit cannot play.
REMOVE
¾
¾
The USB device is drawing too much power.
Remove the USB device.
Remove the USB device.
SET (“ ” stands for a number.)
¾
The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
different codes. Change the code on the
remote control.
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
U59
¾
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
H or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
¾
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
2 Press [
Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
START
¾
¾
The system is being restarted during the
firmware update. Please do not turn off the
unit.
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾
¾
The firmware is being updated.
Please do not turn off the unit.
Please do not turn off the unit.
FIN
¾
¾
The firmware update is complete.
Messages on the screen
Messages on the unit’s
display
DMP-BDT460_360_SQT0080_eng.book 33 ページ 2013年12月19日 木曜日 午後3時0分