Panasonic KX-TG4132 User Manual
Programming
24
For assistance, please visit http://www.panasonic.com/help
4
{
r}: Select the desired setting. s
{
SELECT} 2 times
5
{
OFF}
Call block (Caller ID subscribers
only)
only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”, page
24).
unwanted (“Storing unwanted callers”, page
24).
– the unit receives a call without phone
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
L
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
L
When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 27) with
$ after the call is disconnected.
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 27) with
$ after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
L
call block list.
Important:
L
We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
■ From the caller list:
1
{<}
CID
2
{
r}: Select the entry to be blocked.
L
To edit the number, press {EDIT}
repeatedly until the phone number
is shown in the 10-digit format.
repeatedly until the phone number
is shown in the 10-digit format.
3
{
SAVE}
4
{
r}: “Call block” s {SELECT}
5
{
r}: “Yes” s {SELECT}
6
Edit the phone number if necessary
(24 digits max.).
(24 digits max.).
7
{
SAVE} s {OFF}
■ By entering phone numbers:
1
{
MENU}(217 s {ADD}
2
Enter the phone number (24 digits
max.).
L
max.).
L
To erase a digit, press {CLEAR}.
3
{
SAVE} s {OFF}
Blocking incoming calls without
phone number
phone number
You can reject a call when no phone number is
provided, such as a call just showing “Out of
area
provided, such as a call just showing “Out of
area
”.
1
{
MENU}(24)
2
{
r}: Select the desired setting. s
{
SAVE} s {OFF}
Viewing/editing/erasing call block
numbers
numbers
1
{
MENU}(217
2
{
r}: Select the desired entry.
L
To exit, press {OFF}.
3
To edit a number:
{
{
EDIT} s Edit the phone number. s
{
SAVE} s {OFF}
To erase a number:
{
{
ERASE} s {r}: “Yes” s {SELECT}
s {OFF}
Note:
L
L
When editing, press the desired dial key to
add, {CLEAR} to erase.
add, {CLEAR} to erase.
L
When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: {ERASE} s {V} s
{
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: {ERASE} s {V} s
{
SAVE} s {OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
unit.
TG413x(e).book Page 24 Tuesday, December 7, 2010 8:01 AM