Panasonic KX-TVP200 User Manual

Page of 380
7.1 INITIALISING THE SYSTEM
146
Installation Manual
7.1
INITIALISING THE SYSTEM
Initialising the system clears all voice data except user prompts and returns all system 
parameters to their default settings. Throughout this section, menu selections are indicated as 
"System Administration Top Menu-(Selection Number)".
 This means that the System 
Administration Top Menu must first be accessed. On the first menu displayed, make the menu 
selection corresponding to the first menu displayed. Repeat this process for each subsequent 
menu when additional selection numbers are listed. 
Note
In the following steps (steps 1 through 6), the output of the VT100 TERMINAL mode 
is presented. The output of the ASCII TERMINAL mode is slightly different. For 
example, in Step 1, "5: Quick Setup" does not appear when you are in the ASCII 
TERMINAL mode. There are other differences, but the basic steps are the same.
1.
Go to the System Administration Top Menu
2.
Type [4] for System Initialisation.
Note
Depending on the PBX extension numbering, the "Mailbox No. Length" might be 2 to 
5.
To initialise the system, follow the menu path as shown:
System Administration Top Menu-4
1 : Program
2 : System Reports
3 : Utility command
4 : System Reset/Clear
5 : Quick Setup
SELECT ITEM and PRESS Return-Key
System Reset/Clear Menu
Mailbox No. Length  :3
System Manager's Mailbox No.   :999
Message Manager's Mailbox No. :998
Will you change the settings ? (Y/N): =