Panasonic KX-TVP200 User Manual
7.2 UTILITY COMMANDS
148
Installation Manual
7.2
UTILITY COMMANDS
In the Utility Command Mode, the System Administrator can access the functions described
below by entering the appropriate command at the "$" prompt, and Pressing RETURN.
below by entering the appropriate command at the "$" prompt, and Pressing RETURN.
To select the Utility Commands Menu, follow the menu path as shown:
System Administration Top Menu-3
Table 7-1
OFLN:
Sets the system to off-line mode
ONLN:
Sets the system to on-line mode
PASS:
Sets the System Administrator’s password
TIME:
Sets the system clock, date, and time
PSET:
Specifies the time reports will be printed
ELOG:
Displays device error log
SAVE:
Stores a backup of the programme or data in the hard disk
LOAD:
Restores a backup of the programme or data to the VPS
GPRN:
Displays all of the VPS parameters
VERS:
Displays the version of the programme
CREP:
Displays the keypad assignments, message recording status and the
tree-structure of a Custom service
tree-structure of a Custom service
CCLR:
Clears a Custom service menu access count
MWL:
Specifies the number of times the VPS attempts to turn on the
message waiting lamp on the extensions
message waiting lamp on the extensions
MRL:
Sets the minimum recording length of a message
MPLT:
Displays the user prompt recording status
HELP:
Displays brief instructions and a list of Utility Commands
QSET:
Perform a basic setup of your VPS so that you can use it quickly
LMON:
Line Monitor
PUTD:
Displays Touchtone Information
WCID:
Wait for Caller ID
Utility Command (Type 'HELP' for command list.)
$
$