Panasonic KX-TVP200 User Manual
7.2 UTILITY COMMANDS
Installation Manual
151
3.
Type the current date. For the year, type the last 2 digits.
Note
Enter the exact time and date. This command cannot be used when either the
System or the Message Manager is accessing the time setting feature.
Enter the exact time and date. This command cannot be used when either the
System or the Message Manager is accessing the time setting feature.
7.2.5
Print Reports at Specified Time (PSET)
Use the PSET command to issue system usage reports (Disk Usage Report, Port Usage
Report, Call Account Report) at a specified time each day. A printer or data terminal must be
connected to the VPS at the RS-232C port for the reports to be printed or displayed.
Report, Call Account Report) at a specified time each day. A printer or data terminal must be
connected to the VPS at the RS-232C port for the reports to be printed or displayed.
1.
Type PSET, then Press RETURN.
2.
Type [1] to enable this function or Type [2] to disable it.
3.
Type the time to print the reports.
Note
The reports will be displayed only if the system is in the mode where you see the
following prompt:
The reports will be displayed only if the system is in the mode where you see the
following prompt:
7.2.6
Error Log Display (ELOG)
Use the ELOG command to diagnose VPS problems. Selection of this command will display
an error log.
an error log.
Type ELOG, then Press RETURN.
$ PSET
Report Print Out Service [ Disable ]
1 : Enable 2: Disable :=
Report Print Out Service [ Disable ]
1 : Enable 2: Disable :=
Enter The Print Out Time (HH:MM, AM/PM) :=
>
COM. Communication error between CPU and DSP
DATA Process error of voice data
MEM. Memory error
PRG. Program error in CPU card
R/W Read/Write error of Hard Disk
DATA Process error of voice data
MEM. Memory error
PRG. Program error in CPU card
R/W Read/Write error of Hard Disk