Panasonic KX-TVP200 User Manual
7.2 UTILITY COMMANDS
152
Installation Manual
Note
The following tables display and explain the errors that the system can identify.
* = port number (1-12)
Examples of a terminal display when errors are generated:
Table 7-2 Device Error Log Indications
Indication
Meaning
CPU
MEM-GET
CPU board software memory acquisition error.
CPU board is short of memory temporarily
because of too much traffic.
CPU board is short of memory temporarily
because of too much traffic.
CLOCK
Clock access error. Clock IC is out of order.
Check the hardware.
Check the hardware.
DISK
DATA R/W (xx:yyyy)
HDD access error. If there is a sector that often
causes errors, check the disk.
xx :
causes errors, check the disk.
xx :
IDE error code
yyyy :
read/write error sector number
DSP*
SCAN
DSP-SCAN error. DSP is out of order. Check the
hardware.
hardware.
DSP*
FIFO
DSP/FIFO error. During the system is handling
calls, there was a temporary problem with the DSP
and FIFO memory.
calls, there was a temporary problem with the DSP
and FIFO memory.
CPU
APPLICATION (x)
Application error. While the system is handling
calls, temporary application error occurs.
x: port number
calls, temporary application error occurs.
x: port number
Table 7-3 Error Indications at System Startup
Indication
Meaning
ROM ERROR: Sum Error!!
ROM checksum error.
DISK ERROR: Initialize Error!!
HDD initialisation error.
DISK ERROR: No System!!
No system HDD present.
DISK ERROR: Program Load Error!!
Programme could not be loaded from system
HDD.
HDD.
DISK ERROR: Program Sum Error!!
Checksum error in programme loaded from
system HDD.
system HDD.
$ ELOG
DEVICE ERROR TIME
DEVICE ERROR TIME
14-JUL 2:00 PM
MEM-GET
1. CPU
14-JUL 2:00 PM
2. CLOCK
14-JUL 2:00 PM
DATA R/W (xx:yyyy)
3. DISK
14-JUL 2:00 PM
SCAN
4. DSP*
14-JUL 2:00 PM
FIFO
5. DSP*
14-JUL 2:00 PM
APPLICATION (x)
6. CPU
* = port number (1-12)