Nortel Networks P0857846 User Manual

104 / User Preferences

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

Information about individual displays you may see is described at 
the end of this section.

•

Press 

≠

 at 

User Speed Dial

. The display shows the 

number of speed dial codes that are available.

•

Press 

‘

 to see the first speed dial code (71).

•

Press 

‘

 to move through all the speed dial codes. 

•

Press 

≠

 at the code you want to change.

•

Press 

CHANGE

 and enter the telephone number the same way 

you would dial it on the telephone.

•

Press 

OK

.

•

Press 

‘

 and choose the line (or enter a code for a line 

pool) the speed dial code should use.

Use the line pool code to select a particular line pool for use with 
Speed Dial. If you select 

Use routing tbl

, a line or pool will be 

chosen by the routing programming according to the initial digits in 
the number.

CANCL

Moves you out of a setting without making any changes to it.

CLR

Erases the button.

TEL#

Programs the key as an autodial number for an internal or an 
external number. If it is an external autodial number, you 
have to choose a line, line pool, or the routing table for the 
call to use.

CHANGE

Used when you are setting up an external autodial number. 
Press 

CHANGE

 until you see the type of line or pool you want 

the number to use. 

FEATR

Press to store a feature code on the button.

FIND

Locates a specific button on a telephone by entering its 
number. Button numbers are shown in the illustrations.

LIST

Takes you to a list of feature codes. Press 

‘

 to 

move through the list and press 

OK

 when you see the feature 

you want to program on the button.