Nortel Networks P0857846 User Manual

Page of 187
Making calls / 49
P0857846 Issue 02
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Your installer or customer service representative programs the line 
pool access codes and gives each telephone access to a line pool.
Everyone in the office should have a list of the line pool access 
codes for the line pools their telephones can use.
Using a line pool to make a call 
Press 
ƒfl›
.
Enter a line pool access code.
If you have a free internal line, you can make a call using a line pool 
without entering the feature code first.
Select an internal line (intercom) and dial the line pool access 
code.
Programming a memory button with a line pool feature 
code
When you program a button with the line pool feature code, you 
must enter a line pool access code after the feature code. The 
programmed line pool button accesses a specific line pool, not the 
line pool feature. See “Programming feature buttons” on page 96 for 
more information.
If you program a button with an indicator to access a line pool, when 
all the lines in a line pool are busy, the indicator for the line pool 
button turns on. The indicator turns off when a line becomes 
available.
Changing how you dial your calls 
Press 
ƒ•°¤
.
Press 
£
 or
 
NEXT
 
until the dialing mode you want appears.
Tip - 
If no lines are available in the line pool, you 
can use Ring Again at the busy tone. You will be 
notified when a line in the line pool becomes 
available. See “Using Ring Again” on page 52.
ƒfl›
ƒ•°¤