Siemens 500 economy User Manual

•

Send a message, 
code: 

*

68/#68 

•

Leave an advisory message, 
code: 

*

69/#69 

•

Group ringing, code: 

*

81/#81 

•

Group call, code: 

*

•

Suppress caller ID, 
code: 

*

86/#86 

•

Waiting tone, code: 

*

•

Open door, code: 

*

•

Door opener on/off, code: 

*

•

Control relay, code: 

*

90/#90 

•

Do not disturb, code: 

*

•

Ringer cutoff function, code: 

*

98/#98 

•

Speed-dialing, code: 

*

7 

•

Associated service, code: 

*

83 

Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone 
to tone dialing. The telephone is not connected to the 
system.

D

Set up a call to the system. Enter the station number 
(contact your service personnel).

D

Wait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number 
that has been assigned to you and the associated PIN.

G

Enter the code (necessary only if programmed in the 
system).

D

Wait for a dial tone and then enter the code, such as 

*

97 for Do not disturb on. Make other inputs as neces-

sary; (refer to the operating instructions for pulse and 
DTMF telephones).

D

Dial the external number.

You can only execute one function at a time, or 
set up only one outgoing connection. 
The connection is immediately released after 
successful activation of a function. 
In the case of an external-external call, the con-
nection is released as soon as either of the par-
ties ends the call.