DMP Electronics XR10A User Manual

2841 E. Industrial Drive  Springfield, MO  USA  65802-6310  800-641-4282

Digital Monitoring Products

Transformer Input: 16.5 VAC  40VA or 16.5 VAC  20VA

Standby Battery: 12 VDC 7.0Ah (40VA transformer charges up to 2 batteries)

Auxiliary Output: 12 VDC at 500mA

Bell Output: 12 VDC at 1.5 Amps with 40VA transformer, 600mA with 20VA transformer

Smoke Detector Output: 12 VDC at 100mA

All circuits inherent power limited

Built-in SDLC Digital Dialer communication to DMP Model SCS-1 Receivers
Built-in 4-2 communication to non-DMP receivers
Built-in M2E (Radionics Modem IIe) communication to non-DMP receivers (XR20A only)
Built-in CID (Contact ID) communication to non-DMP receivers

All panels can operate as a local system.

Nine 1k 

W

 EOL burglary zones (zones 1 to 9), (zones 1 to 5 on XR6A)

One 3.3k 

W

 EOL Class B powered fire zone with reset capability (zone 10 on XR10A and XR20A), (zone 6 on

XR6A)

You can connect up to four of the following supervised keypads to the XR6A/XR10A/XR20A panels.

• 16 or 32 character alphanumeric keypads

• 10-zone LED keypads

In addition, four and single point zone expanders can be added to the XR20A panel.

When using the FA426 Wireless Receiver, the XR20A allows unsupervised devices to be added to address five.

The XR6A/XR10A/XR20A panels provide four open collector outputs rated for 50mA each. See section 12.1. A
Model 300 Wire Harness is required. The open collector outputs provide the ground connection for a positive
voltage source.

The XR6A/XR10A/XR20A panel ships in an enclosure with EOL resistors, battery leads, user's guide, and
programming sheet.

Size:

12.5" W x 9.5" H x 2.75" D

Weight:

4 lbs

Color:

Gray or Black

Construction:

20 gauge cold rolled steel

Page 1