Motorola BLINK1-B User Manual

created by:  Pro. Q.C. Systems Design Limited

30

31

®

®

Follow the same steps as under 

®

®

Note: If your camera is moved from one router (e.g. home) to 

another router (e.g. office) or you have camera setup issues, 

then this camera must be reset again, and then the camera set 

up again for devices for Android

TM

 or iPhone

®

/iPad

®

.

1.  Switch the ON/OFF switch to ON.
2.  Press and hold the RESET button on the underside of 

the camera for 5 seconds, until you hear a beep sound.

3.  Release the RESET button and wait for the camera to 

complete the internal reset procedure.

4.  After about 60 seconds you will hear two short beeps and 

the green LED starts blinking.

•  Please be patient, it may take a few minutes until your camera 

appears in your Wi-Fi

®

 devices list, or is added to your account.

Adding another Camera: Working with iPhone

®

/iPad

®

30

Procedure for resetting the Camera

31

Tap 

Cameras to return to the Camera list.

Tap on   to add another camera to the list.

•  Tap on 

•  Tap 

Remove to take a camera off the list.

•  Tap 

Rename to give a camera a new name.

•  Tap 

Alert Settings to receive notifications if a noise is 

detected or the temperature in your baby’s room is too high 

or too low. 

•  If you use Alert Settings, under Settings on your iPhone

®

/

iPad

®

, select 

ON. 

•  Select your preferred Alert Style and return to the application 

and tap 

Done. 

•  Tap 

Cancel to return to the camera list.

•  Tap on 

Account to change the password.

•  Tap on 

Logout to leave the account.

BLINK1_USA_V3_2013_04_18.indd   30-31

18/4/13   2:09 PM