Panasonic WV-CW384 User Manual

About Setup Menus

Before operation, setup of this camera is required. On the setup menu, you can check current settings and perform settings to
meet requirements.
The following is an example of setup procedure when "LANGUAGE" is set to "ENGLISH".

Settings items of the camera setup page

Setup item

Description

Reference

Pages

CAMERA

Configure the settings relating to camera operations

CAMERA ID

The camera title can be edited and displayed on the screen.

ALC

Configure the light control method.

SHUTTER

Select the shutter speed.

AGC

Select the method of the gain adjustment.

SENS UP

Adjust the sensitivity.

SYNC

Configure the method of the synchronization.

WHITE BAL

Select the method of the white balance adjustment.

MOTION DET

Configure the settings for the motion detection function.

DNR

Configure the settings for the DNR (Digital Noise Reduction) function.

RESOLUTION

Select a horizontal resolution mode.

BW MODE

Configure the settings relating to the BW mode such as the settings for switching
between the color mode and the BW mode.

PRIVACY ZONE

It is possible to mask a designated zone and as a privacy zone.

EL-ZOOM

Adjust the electronic zoom.

STABILIZER

Select "ON" or "OFF" to determine whether or not to use the image stabilizer to pre-
vent shaky images.

LED

Performs the settings for LED.

BACK-FOCUS

Select the method of the flange-back (back focal) length adjustment and adjust the
flange-back (back focal) length minutely.

SPECIAL

CHROMA GAIN

Adjust the chroma level (color density).

AP GAIN

Adjust the aperture level.

PEDESTAL

Adjust the pedestal level (brightness).

HUE

Adjust the chroma phase.

PIX OFF

Correct image defects such as scratches.

CAMERA RESET

Reset the settings of setup menu to the default settings.

SER.NO.

Check the serial number of this camera.

LANGUAGE

Select the language to display the setup menu.