Panasonic WV-CW384 User Manual

22

■ Basic operation

The following are descriptions of how to configure each setup item using the operation buttons (refer to page 8) on the cam-
era. Setup using an optional system controller is also available.

• The illustrations below are the examples to be displayed on a video monitor.

1. Hold down the [SET] button for around 2 seconds.

→

The top page will be displayed.

2. Move the cursor onto "END" by press the [UP] or [DOWN] but-

ton.

3. Press the [SET] button after moving the cursor onto "SETUP" by

pressing the [RIGHT] button.

→

The "DISABLE" indication will change into "ENABLE" and
the settings will become editable.

4. Move the cursor onto the desired setup item and press the

[SET] button.

→

The setup page of the selected setup item will be dis-
played.

5. Configure the settings for each item.

Select setup item: Move the cursor by pressing the [UP] or

[DOWN] button.

Change the parameter: Press the [LEFT] or [RIGHT] button.
Display the detailed settings page of the setup item: Press

the [SET] button when the setup item with the [

O] mark is

selected.

Go back to the previous page: Move the cursor onto "RET"

and press the [SET] button.

Go back to the top page: Move the cursor onto "TOP" and

press the [SET] button.

6. To exit from the SETUP menu and display images from the camera, move the cursor onto "END" and press the [SET] but-

ton.

• To prevent erroneous operations, the "DISABLE" indication will always be displayed when the top page is displayed from

the camera. To operate the SETUP menu, switch the "DISABLE" indication to the "ENABLE" indication first.

• The cursor position will be displayed highlighted.