Panasonic WV-CW504S User Manual

25

Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the "BACK-FOCUS 
SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. 
The lens adjustment (☞ Installation Guide) shall be performed before the back focus adjustment. 

<Back focus adjustment>
The back focus adjustment is performed by changing the distance between the lens and focal point. 
Follow the procedure below. 

 •  The auto back focus function is used for back focus adjustment at installation and for focus correction at switching between the

color and black-and-white modes after installation. This function is not a function that is supposed to be operated continuously 
such as the auto focus function. 

 •  When focus missing occurs due to secular change in the lens and installation environment or peripheral temperature change, the

back focus adjustment is required again. 

 •  The back focus adjustment can be also performed through the operation buttons. (☞ Installation Guide.)

Move the cursor to "PUSH SW" of "ABF" and press the setting button. 
 

→  The auto back focus function provides back focus adjustment to automatically focus on a subject located in the center of the 

screen. 

To fine adjust the back focus, move the cursor to "MANUAL-ADJ", press the setting button, and use the right or left button to adjust 
the back focus manually. 

 •  Holding down the right and left buttons for more than 2 seconds simultaneously resets the back focus position to the CS mount

default position.

 •  The value of "INDICATOR" is a guide to adjust the back focus. The larger the value is, the sharper the image becomes.

     

"BACK-FOCUS SETUP" screen

|.........