Panasonic WV-CW504S User Manual

24

Select "On" or "Off" to determine whether or not to use the electronic zoom. 
When "ON" is selected, the zoom factor and the panning/tilting settings can be configured. 
ON: Uses the electronic zoom. 
OFF (default): Does not use the electronic zoom. 
Follow the procedure below. 

Move the cursor to "EL-ZOOM", select "ON" and press the setting button. 
 

→  The "EL-ZOOM" screen will be displayed. 

Move the cursor to "PUSH SW" of "ZOOM" and press the setting button. 
 

→  The zoom setting screen appears. 

Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the up or down button. 

 •  When the zoom factor is incremented, resolution will be deteriorated.

Move the cursor to "PUSH SW" of "PAN/TILT" and press the setting button. 
 

→  The pan/tilt setting screen appears. 

Use the up, down, right, and left buttons to determine the image position and press the setting button. 
The position can be changed in the range of zoom factor set in the "EL-ZOOM" screen. 

 •  To reset to the default, hold down the right and left buttons for more than 2 seconds simultaneously while the zoom setting screen

or pan/tilt setting screen is displayed. 

Select "On" or "Off" to determine whether or not to display the camera images flipped vertically or horizontally. Image horizontal flip is 
selected in accordance with the camera location (usage environment). 
ON: Flips the camera images vertically or horizontally. 
OFF (default): Does not flip camera images vertically or horizontally.

EL-zoom setting screen

Zoom setting screen

Pan/tilt setting screen

"SYSTEM SETUP" screen