Avaya 03-300430 User Manual

The Virtual Announcement Media Module faults are managed as server alarms. In the S8300 
Media Server, the Virtual Analog Angel (VAA) represents a messaging board. The VAA is a 
virtual board on the G700. When the G700 reboots, the VAA senses that it has lost connectivity 
with the G700, and triggers its "removal and re-insertion". The removal of the VAA causes the 
AUDIX ports to go out-of-service and to return back in service when the re-insertion is complete. 
An alarm of MAJOR severity is generated, indicating loss of connectivity with the G700, which 
must be cleared manually. 

summarizes this server alarm.

Back to:              

             

The Remote Supervisor Adapter (RSA) board is installed in PCI-X slot 1 of the S8500 Media 
Server. It monitors and reports alarms on S8500 components and software and provides control 
to power on and power off the server. 

1

MAJ

Virtual Analog Angel (VAA) loss of connectivity with a G700, resulting in 

temporary Out of Service (OOS) of AUDIX ports. A G700 reboot caused VAA 

to "remove and re-insert" virtual board. Must be cleared manually.

1. Manually clear the alarm, either from the:

- Web interface, by selecting Alarms and Notification, the 

appropriate alarm, and Clear

- Linux command line, by entering almclear -n #id

2. Execute list configuration all on SAT.

Verify that V8 MG MSG BOARD does not show no board against it. 
(no board means AUDIX ports OOS.)