Avaya 03-300430 User Manual

When testing of the EI is not possible, (for example, when the PN is down), see the previous EI 
Manual Loop-Back procedure.

This test is nondestructive.
The Expansion Interface Neighbor Query test is a request to an EI circuit pack to determine 
whether it has established communication with its neighbor EI or SNI circuit pack.

1033

ABRT

The EI circuit pack does not have a fiber link administered to it. There is 
not sufficient data to run test.

1. Enter list fiber-link to verify that there is no fiber link 

administered to this circuit pack.

2. If there is no fiber administered to this circuit pack, but there should be 

add the correct fiber using add fiber-link.

3. Retry the command.

2000

ABRT

Response to the test was not received within the allowable time period.

1. Retry the command at 1-minute intervals up to 3 times.

2031

ABRT

The attempt to send the message to the EI circuit pack, asking it who it’s 
neighbor is, was not successful.

1. Retry the command at 1-minute intervals up to 3 times.

2100

ABRT

System resources required to run this test are not available. Someone 
may be doing something on this Port Network Interface.

1. Retry the command at 1-minute intervals up to 3 times.

2500

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 3 times.

 1 of 2