Avaya 03-300430 User Manual

2801

ABRT

The IP Media Processor board has not been administered on the 

ip-interfaces form.

2806

ABRT

The system could not find any in-service IP Media Processor boards to use 

as a destination for this test.

2807

ABRT

The specified IP Media Processor board has been disabled on the 

ip-interfaces screen.

10XX
XX = PN #

FAIL

The test tone was not successfully sent from the IP Media Processor 

specified in the test command, and not successfully received by an IP 

Media Processor in the PN specified in the error code (XX). Source to 

destination direction failed. Destination to source direction not tested.
XX = PN number.

1. Resolve all other board alarms for the specified source IP Media 

Processor.

2. Resolve all other board alarms for the IP Media Processor boards in 

the destination PN.

3. Use ping and traceroute to localize the problem to the customer’s 

LAN/WAN IP network.

20XX

FAIL

The test tone was successfully sent from the IP Media Processor specified 

in the test command and received by an IP Media Processor in the PN 

specified in the error code (XX).
The test tone was not successfully sent in the reverse direction. 
Destination to source direction failed. Source to destination direction 
passed.

1. Resolve all other board alarms for the specified source IP Media 

Processor.

2. Resolve all other board alarms for the IP Media Processor boards in 

the destination PN.

3. Use ping and traceroute to localize the problem to the 

customer’s LAN/WAN IP network.

PASS

The customer network is functioning properly. The test tone was 

transmitted and received successfully between:

●

The IP Media Processor specified in the test command

●

Every other IP Media Processor in the set of connected IP network 
regions.

 2 of 3