Avaya 03-300430 User Manual
Denial Events
144 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Cause Value 23
[0x17/0x97] -
Redirection to new destination
The call has been redirected to a different endpoint.
Communication Manager does not originate Cause Value 23.
Redirection to new destination
The call has been redirected to a different endpoint.
Communication Manager does not originate Cause Value 23.
Cause Value 25
[0x19/0x99] -
Exchange routing error
The call cannot be routed to the remote party.
Exchange routing error
The call cannot be routed to the remote party.
Cause Value 26
[0x1A/0x9A] -
Non-selected user clearing
The call was cleared before the called endpoint was awarded the incoming call.
Non-selected user clearing
The call was cleared before the called endpoint was awarded the incoming call.
Cause Value 27
[0x1B/0x9B] -
Destination out of order
The call cannot be delivered to the remote endpoint because the interface to the endpoint is not
functioning correctly. A signaling message could not be delivered to the remote device (for
example, there is a physical or data link layer failure at the remote device, or the remote device
is turned off).
Communication Manager does not originate Cause Value 27.
Destination out of order
The call cannot be delivered to the remote endpoint because the interface to the endpoint is not
functioning correctly. A signaling message could not be delivered to the remote device (for
example, there is a physical or data link layer failure at the remote device, or the remote device
is turned off).
Communication Manager does not originate Cause Value 27.
Cause Value 28
[0x1C/0x9C] -
Invalid number format (address incomplete)
Special intercept announcement (NI-1: National ISDN 1)
The called endpoint could not be reached because the CALLED PARTY NUMBER information
is not in a valid format or is not complete.
This Cause Value has end-to-end significance and should always be passed back through the
network to the user.
Invalid number format (address incomplete)
Special intercept announcement (NI-1: National ISDN 1)
The called endpoint could not be reached because the CALLED PARTY NUMBER information
is not in a valid format or is not complete.
This Cause Value has end-to-end significance and should always be passed back through the
network to the user.