Avaya 03-300430 User Manual

This test verifies control functionality between the on-board microprocessor and programmable 
speech synthesizer (PSS) controller. A failure occurs if either of the following events occur:

●

The on-board microprocessor times out while waiting for the PSS controller to respond.

●

An invalid command is received by the on-board microprocessor from the PSS controller.

This type of failure will affect all four ports on the Speech Synthesis circuit pack, resulting in 
errors or alarms on each port.

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

1000

ABRT

System resources required to run this test are not available. The port may 
be busy with a valid call and therefore unavailable for certain tests. Wait 
until the port is idle (amber LED is off) before retesting.

1. If the port is idle, retry the command at 1-minute intervals up to 5 times.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

Any

FAIL

The on-board microprocessor has timed out while waiting for the PSS 
controller to respond or an invalid command has been received by the 
on-board microprocessor from the PSS controller. This type of failure may 
cause features using the Speech Synthesis port’s speech services to 
malfunction.

1. Replace the circuit pack.

PASS

The on-board microprocessor/PSS handshake is working correctly. 

User-reported troubles should be investigated using other tests and by 

verifying other ports on this circuit pack are working correctly.