Avaya 03-300430 User Manual
LEDs
294 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
EXT 1 LED
EXT 1 LED appears on the LED Panel (
which reports the status of the first 10/100 MB/sec port (these LEDs report the 8 different
functional statuses dictated by the left and right arrow buttons).
functional statuses dictated by the left and right arrow buttons).
EXT 2 LED
EXT 2 LED appears on the LED Panel (
which reports the status of the second 10/100 MB/sec port (these LEDs report the 8 different
functional statuses dictated by the left and right arrow buttons).
functional statuses dictated by the left and right arrow buttons).
G700 LED panel definitions
on page 294 illustrates the LED definitions for the G700 LED Panel.
Table 81: LED Definitions
No.
LED Name
Description
LED States
1
ALM
Alarm Status
Color is RED
OFF - No alarms exist
ON (RED) - Alarm exists on the chassis itself
ON (RED) - Alarm exists on the chassis itself
2
PWR
Alarm Status
Color is
GREEN
OFF - Power is down
ON - Power is up
Blinking - every 1.2 seconds (400ms on, 800ms off)
ON - Power is up
Blinking - every 1.2 seconds (400ms on, 800ms off)
when 5 volts power is not available to the riser
board and the Media Modules
3
CPU
CPU Operation
Color is
GREEN
OFF - CPU is in boot operation or is running BIST
ON - CPU boot operation and BIST completed
ON - CPU boot operation and BIST completed
4
MSTR
Master/Slave
Status Color is
GREEN
OFF - Slave box of the stack
ON - Master of the stack and redundant cable is not
ON - Master of the stack and redundant cable is not
present or not active
1 Blink every 1.5 sec - Master of the stack and
1 Blink every 1.5 sec - Master of the stack and
active redundant cable
5
a
LNK port
51-66, Ext
1-2
Port Status
Color is
GREEN
OFF - Port disabled or not existent. At phase 1, or
link fail of Giga ports.
ON - Port is enabled and link is OK.
1 Blink every 1.5 sec - Link test fail (of 10/100M
ON - Port is enabled and link is OK.
1 Blink every 1.5 sec - Link test fail (of 10/100M
ports only at phase 1)
2 Blinks every 1.5 sec - Partition
2 Blinks every 1.5 sec - Partition
b COL
Port 51-66,
Ext 1-2
Collision
(GREEN)
OFF - No collision or FDX port
ON - Collision occurred on line
ON - Collision occurred on line
1 of 2