Bosch FW5.50 User Manual

en | Interfaces

Camera Browser Interface

AM18-Q0611 | v5.50 | 2012.03

Software manual

Bosch Security Systems

Configure the alarm triggers for the camera.

Select N.C. (Normally Closed) if the alarm is to be triggered by 

closing the contact.

Select N.O. (Normally Open) if the alarm is to be triggered by 

opening the contact.

Enter a name for the alarm input. This is then displayed below 

the icon for the alarm input on the LIVEPAGE (if configured).

Configure the switching behavior of the relay output. 

Select different events that automatically activate an output. 

For example, turn on a floodlight by triggering a motion alarm 

and then turn the light off again when the alarm has stopped.

Select Open for the relay to operate as an N.O. contact, or 

select Closed if the relay is to operate as an N.C. contact.

Select the way the relay works. 

Select the event that triggers the relay. 

The relay can be assigned a name here. The name is shown on 

the button next to Trigger relay. The LIVEPAGE can also be 

configured to display the name next to the relay icon.

Click the button to switch the relay manually (for example, for 

testing purposes or to operate a door opener).