Bosch D625 User Manual

D623 Series/D625 Series | User's Guide | Change Outputs (Cmd 54) 

 

 

28 

Bosch Security Systems | 9/04 | 46841E 

 

9.

 

You now decide that you do not want this sked to 
activate on Monday. To remove Monday, press 
[2]. 

 

10.

 

Press [CMD] when you are done changing the 
sked. 

Change Outputs (Cmd 54) 

 

I can perform this command. 

 

I cannot perform this command. 

Use this command to turn on and off the outputs 
programmed by your security company. These outputs 
can control outside lighting, pool pumps, watering 
systems, etc. 
1.

 

Ensure the system is turned off (On indicator is 
off). 

2.

 

Press [CMD] [5] [4]. The keypad may prompt you 
to enter a valid passcode. 

3.

 

Enter your passcode if necessary. The keypad 
scrolls: 

 

4.

 

Press [0] [*] if you want to turn all outputs off, or 
press the output number you want to turn off 
followed by [*]. For example, if you want to turn 
Output 1 off, you press [1] [*]. The keypad 
displays: 

 

5.

 

Press [CMD] to return the keypad to the normal 
display. 

Remote Program (Cmd 43) 

 

I can perform this command. 

 

I cannot perform this command. 

Use this command to connect to your security 
company’s remote PC computer for programming 
alterations via the telephone line. 

 

 

Only use this command when your 
security company instructs you to. 

 

1.

 

Ensure the system is turned off (On indicator is 
off). 

2.

 

Press [CMD] [4] [3]. The keypad may prompt you 
to enter a valid passcode. 

3.

 

Enter your passcode if necessary. The keypad 
displays: 

 

If your system is busy and cannot call your 
security company’s remote PC computer, the 
keypad displays: 

 

4.

 

The keypad automatically returns to the normal 
display when programming is complete. 

All Areas Off (Cmd 81) 

 

I can perform this command. 

 

I cannot perform this command. 

Depending on the areas assigned to your authority 
level, this command turns off all areas at the same time 
when the system is split into more than one area. 
1.

 

Press [CMD] [8] [1]. The keypad may prompt you 
to enter a valid code. 

2.

 

Enter your passcode if necessary. The keypad 
indicates that all areas are off. 

All Areas On (Cmd 80) 

 

I can perform this command. 

 

I cannot perform this command. 

Depending on the areas assigned to your authority 
level, this command turns on all areas at the same time 
when the system is split into more than one area. 
1.

 

Press [CMD] [8] [0]. The keypad may prompt you 
to enter a valid passcode. 

2.

 

Enter your passcode if necessary. The keypad 
displays: 

 

If an area has a faulted point(s) when you try to 
turn all areas All On, the keypad scrolls: 

 

3.

 

If you hold down the All On key for 2 sec., it 
forces all areas to All On.