Bosch D625 User Manual

D623 Series/D625 Series | User's Guide | Move to Area (Cmd 50) 

. 

 

Bosch Security Systems | 9/04 | 46841E 

29 

 

4.

 

The keypad now displays all areas that have been 
forced on, one at a time. 

 

Move to Area (Cmd 50) 

 

I can perform this command. 

 

I cannot perform this command. 

Use this command to operate multiple areas from the 
same keypad when the system is split into more than 
one area. Before operating another area, move the 
keypad to the area that you want to operate. 
1.

 

Press [CMD] [5] [0]. The keypad may prompt you 
to enter a valid passcode. 

2.

 

Enter your passcode if necessary. The keypad 
scrolls through all available areas you can move to.  
In this example, you are at Area 1 keypad, which 
prompts you to press 2 to go to Area 2 or to press 
3 to go to Area 3: 

 

3.

 

Press [CMD] to exit this feature. 

4.

 

To return your keypad to its “home” area, press 
and hold [CMD]. 

 

Auto-Forward On Setup 

(Cmd 83) 

To utilize this command you must have “call 
forwarding” service from your local telephone 
company. Using that service, your security system 
allows you to program the auto-forward on sequence 
that forwards all incoming calls to the telephone 
number of your choice when you turn the system All 
On. 
1.

 

Press [CMD] [8] [3]. The keypad may prompt you 
to enter a valid passcode. 

2.

 

Enter your passcode if necessary. The keypad 
display scrolls: 

 

3.

 

Enter the auto-forward off sequence to redirect all 
incoming calls. 

4.

 

Press and hold [Cmd] to exit this command. 
A typical dialing sequence might be: 
• 

two-digit telephone company feature code (72) 

• pause 
• 

phone number to forward to (315-555-1212) 

• 

flash (on-hook, pause, off-hook) 

• terminate 

(t) 

For this sequence, the entry would look like: 
7 2 p 3 1 5 5 5 5 1 2 1 2 f t