Bosch D1260B User Manual

D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM ? (COMMAND + 1) 

 

 

Bosch Security Systems | 9/04 | 50410D 

19 

 

MASTER ARM ? (COMMAND + 1) 

Description 

Use this function to turn on the entire system, both 
perimeter and interior. When you turn on the system, 
the display shows how many seconds of exit delay time 
you have to exit the protected area. You should leave 
before exit delay time expires. 

Leaving after exit delay has expired will cause the 
entry delay to start. You may also cause an alarm on 
an interior device. Enter your personal passcode to 
disarm the system. 

This function may be used by your cleaning service, a 
serviceman, or others who need to turn on your system 
when they leave. 

Using Master Arm: 

 

 

Using the COMMAND +1 shortcut will 
only arm the area where the keypad has 
been assigned. Example, if the D1260 is 
assigned to Area 1, only Area 1 will be 
armed when COMMAND + 1 is pressed. 

 

1.

 

The display shows disarmed idle text. 

 

2.

 

Press the 

COMMAND key. 

3.

 

The display shows 

*System Command*

. 

 

4.

 

Press the 

1 key 

5.

 

If your system is programmed to require a 
passcode when performing a COMMAND 1, the 
display prompts you to enter your passcode. 

The passcode is shown as asterisks (*). 

 

 

6.

 

If the passcode has valid authority for this 
command, the display shows 

Exit now #

 (# = exit 

delay time remaining) 

seconds remaining

. 

 

After the exit delay time expires, the display 
changes to idle armed text. 

 

7.

 

To disarm your security system, enter your 
personal passcode and press 

ENTER.