Bosch D1260B User Manual
D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM INST ? (COMMAND + 1 + 1)
Bosch Security Systems | 9/04 | 50410D
21
13.
To disarm your security system, enter your
personal passcode and press
personal passcode and press
ENTER.
14.
The display changes to show that all the areas are
disarmed.
disarmed.
Depending on what areas are armed or areas that
you have authority,
you have authority,
12345678 may or may not
appear.
The display returns to idle text.
MASTER ARM INST ? (COMMAND + 1 + 1)
Use this function to turn on a single area, both
perimeter and interior without delays. When entering
COMMAND 11, remember that the second 1 must be
pressed within 2 seconds after pressing the first 1.
perimeter and interior without delays. When entering
COMMAND 11, remember that the second 1 must be
pressed within 2 seconds after pressing the first 1.
The menu entry
MASTER ARM INST>
is different in
that it allows all or selected areas to be armed instantly.
COMMAND 11 does not comply with SIA
CP-01 Standard.
CP-01 Standard.
Using the COMMAND + 1 + 1 shortcut
will only instantly arm the area where the
keypad has been assigned. Example, if the
D1260 is assigned to Area 1, only Area 1
will be armed when COMMAND + 1 + 1
is pressed.
will only instantly arm the area where the
keypad has been assigned. Example, if the
D1260 is assigned to Area 1, only Area 1
will be armed when COMMAND + 1 + 1
is pressed.
1.
The display shows disarmed idle text.
2.
Press the
COMMAND key. The display shows
*System Command*
.
3.
Press the
1 key. Now press the 1 key again.
4.
The keypad display shows
AREA 1
WAREHOUSE All On Instant
.
5.
To disarm your security system, enter your
personal passcode and press
personal passcode and press
ENTER.