Rinnai RHFE-263FAII User Manual
17
Rinnai Corporation RHFE-263FA
Ⅱ
Drilling
Flue
Hole
Ensure that there are no gas or water lines, or
electrical circuits in the wall location where the flue
hole is to be drilled. Drill the flue hole using a 3 1/8
inch (80 mm) drill. The center of the hole must be
located exactly at the specified point.
electrical circuits in the wall location where the flue
hole is to be drilled. Drill the flue hole using a 3 1/8
inch (80 mm) drill. The center of the hole must be
located exactly at the specified point.
See diagram. For weatherboard walls, drill through
the center of the weatherboard from the outside first
and then through the plasterboard. A template is
provided.
the center of the weatherboard from the outside first
and then through the plasterboard. A template is
provided.
Dimensions
3 7/16" (88)
4 5/16"
(109.5)
4 3/4"
(121)
(121)
WALL OPENING
POSITION
GAS CONNECTION
26 5/8" (676.5)
3 1/8"
(
φ80)
10 3/8" (264.5)
24 1/4" (616)
16 3/4" (425)
FLUE
ELBOW
4 1/2"
(114)
(114)
6 1/2" (165)
3 3/8" (85)
1 5/8" (41.2)
1" (25)
12 1/16" (306.5)
4 9/16" (116.5)
GAS CONNECTION
4 5/16"
(109.5)
WALL OPENING
POSITION
3 1/8"
(
φ80)
10 3/8" (264.5)
FLUE
ELBOW
4 1/2"
(114)
(114)
inches (mm)