Grizzly G0573 User Manual

-10-

G0573 Two Speed Floor Air Filter

Operations

Operation Safety

To operate the unit:

1. Connect the unit to power and push the HI

or LOW start switch. The fan should start up
and begin filtering air in the room.

2. If it does not start, turn the switch OFF and

disconnect the power.

• Check the breaker/reset switch located next

to the start switch and reset if needed.

• Check to make sure the outlet connected to

the filter is in working condition. Reset the
breaker or replace the fuse if needed.

If the air filter continues to have problems, please
call our customer support lines at (570) 546-9663
for troubleshooting information.

SECTION 4: OPERATIONS

Operations that generate

large amounts of any kind

of dust may warrant the

use of a respirator even

though the dust filter is

running. The dust filter

is not a substitute for a

respirator!

THIS DUST FILTER IS TO BE USED FOR

WOOD DUST ONLY. DO NOT use this

machine to filter toxic fumes or paint spray.

DO NOT use this machine to dissipate

smoke or fumes.

Operating this equipment creates the poten-

tial for flying debris to cause eye injury.

Always wear safety glasses when operating

equipment. Everyday glasses or reading

glasses only have impact resistant lenses,

they are not safety glasses. Be certain the

safety glasses you wear meet the appro-

priate standards of the American National

Standards Institute (ANSI).

Available Accessories

Grizzly carries a complete selection of fine
accessories for all of its equipment. Below is
a list of accessories we are sure you will find
useful.

• Dust Collection Basics, Model G2525

• Remote Dust Collector Switch, Model

H2797 or H5397

• Primary Filter, P0573007

• Pre-Filter, P0573008