Grizzly G0573 User Manual

G0573 Two Speed Floor Air Filter

-11-

SECTION 5: MAINTENANCE

Cleaning the Filters

To  maintain  optimal  operation,  the  filters  in  the
Two  Speed  Floor  Air  Filter  should  be  checked
and  cleaned  or  replaced  regularly  depending
on usage. We recommend checking the primary
filter  and  pre-filter  once  a  month  or  more  often
if usage is high. Always wear a respirator when
checking the filters.

To check, clean or replace the filters:

1. Disconnect power to the air filter.

2. Disengage the latches and swing open the

front door.

3. Remove the pre-filter, place it inside a trash

bag, and gently shake the dust from the fil-
ter.

Use a respirator when

cleaning or changing fil-

ters. Dust will become

airborne creating a respi-

ratory hazard. For safe-

ty, run the air filter for

at least 6 minutes while

wearing the respirator

after cleaning.

To avoid personal injury,

disconnect power to air

filter when performing

any adjustments, clean-

ing or maintenance.

The primary air filter is heavy and could

cause injuries if it drops on your feet. Use

care when sliding it out of the air filter

cabinet.

Note—The  pre-filter  can  be  washed  with
water to remove the last of the dust and help
maximize  its  filtering  effect.  DO  NOT  use
compressed  air  to  clean  the  pre-filter,  as  it
may get damaged and lose its filtering capa-
bilities.

4. Be sure the pre-filter is completely dry before

re-installing it into the air filter.

5. Slide the primary air filter out of the air filter

cabinet.

6. Slide a new primary air filter into the air filter

cabinet, shut the door and engage the latch-
es.

During regular use, the pre-filter can be cleaned
several  times  before  it  needs  to  be  replaced.  It
is important to look for holes in the pre-filter that
would  reduce  the  filtering  effect.  Please  see  the
current  Grizzly  catalog  for  replacement  informa-
tion.