Regency U32-NG4 User Manual

U32-4 FPI Direct Vent Gas Insert

IMPORTANT: Please use the gloves provided when handling the Kensington

®

 Front to avoid fi ngerprints.

3)  Slide the Tabs on the Blanking Plate into the slots located on Front 

and secure using 2 screws.

1)  Place the Kensington

®

 Front up against the unit , but do not secure. 

Make the following wire connections:

 

Connect the fan switch wires by taking the black and red wires with 
the male ends (in the grey harness) and connect them with the wire 
connectors from the fan speed control.

Connect the ON/OFF switch wires by taking the black and red wires 
with the female ends and connect them to the ON/OFF switch.

 
 

Tuck the wires into the faceplate to keep them away from the insert 
using the clip provided. Attach the clip to the rear of the faceplate to 
ensure that the wires do not touch the side of the unit. 

The power cord should be run behind the faceplate panel.

2)  Mount the Kensington

®

 Front onto the fi rebox by securing in place 

using 4 screws, 2 per side.