Regency P48-2 User Manual

Regency

®

 P48-2 Zero Clearance Direct Vent Gas Fireplace

NOTE:  Remove both the Flush Louvers or Bay Louvers and the Flush Front or Bay Front prior 
to installing the Finishing Trim.

1)  Install the Finishing Trim sides as shown in the diagram, line up the holes in the side trim with 

the holes in the fi rebox side.

2)  Secure with 2 screws per side.

3)  Loosen the 3 screws in the top inside edge of the fi rebox.

4)  Slide the Finishing Trim Top over the Side Trim pieces and fi t the bottom bracket slots over 

the screws. Tighten the 3 screws to secure.

1)  Pull out the top louver.

2)  Center the screen door and hook over the 

fl ush door.

3)   Open the screen door(s) and secure the 

screen door to the fl ush door front with 2 
clips on the bottom left and right side.