Regency L234-LP User Manual

Regency

®

 L234 Direct Vent Gas Insert

INST

ALLA

TION

13) Tuck the wires completely into the sleeve and place the supplied 

cable tie to the end of it as shown in diagram 11.

Diagram 11

14) Place the grommet removed from step 10 over the sleeve (see 

diagram 12) and put back in place (see diagram 13). 

NOTE: Ensure connectors are tucked in behind the mounting bracket  

      to allow the side faceplate panel to close easily. 

Diagram 12

Diagram 13

15) Re-install the remote receiver bracket (reverse step 10).

16) Close the left side faceplate panel.

17) Fit the bottom louver into the slots at the bottom of the fi rebox as 

shown in diagram 14.

Diagram 14