Toshiba RAV-SM802UT-E User Manual

– 135 –

Valve 

cover

Wiring 
cover

Upper cabinet

Water-proof 
cover

Cord clamp

Rear cabinet

Claw



Common
procedure

Never forget to put on the gloves at
working time, otherwise an injury will be
caused by the parts, etc.

1) Stop operation of the air conditioner, and

turn off the main switch of the breaker for
air conditioner.

2) Remove the valve cover.

(ST1T Ø4 × 10L, 1 pc.)
• After removing screw, remove the valve

cover pulling it downward.

3) Remove wiring cover (ST1T Ø4 × 10L, 2

pcs.), and then remove connecting cable.

4) Remove the upper cabinet.

(ST1T Ø4 × 10L, 2 pcs.)
• After taking off screws, remove the

upper cabinet pulling it upward.

1) Attach the waterproof cover.

Be sure to attach a waterproof cover.
If it is not attached, there is a possibility
that water enters inside of the outdoor
unit.

2) Attach the upper cabinet.

(ST1T Ø4 × 10L, 2 pcs.)
• Hook the rear side of the upper cabinet

to claw of the rear cabinet, and then put
it on the front cabinet.

3) Perform cabling of connecting cables,

and fix with cord clamp.
(ST1T Ø4 × 10L 3 pcs.)

4) Attach the wiring cover.

(ST1T Ø4 × 10L, 2 pcs.)

5) Attach the valve cover.

(ST1T Ø4 × 10L, 1 pc.)
• Insert the upper part of the upper

cabinet, set hooking claw of the valve
cover to the slit (at three positions) of
the main body, and then attach it
pushing upward.