TEAC SR-80i User Manual

<  You  can  also  select  “FM”  or  “AM”  by  pressing  the 

BAND button once or twice.

Hold down

Hold down the TUNING button and release it 
when the automatic tuning process starts. When 
a station is tuned in, the tuning process will stop 
automatically.
Repeat this step until the station you want to listen to 
is found.

<  To stop the automatic tuning process, press the 

TUNING button briefly.

Press the TUNING button repeatedly.
The frequency changes by a fixed step.
Press repeatedly until the station you want to listen 
to is found.

When the source is “FM”, pressing the FM MODE 
button alternates between stereo mode and mono 
mode.

“Stereo” appears on the display for a few seconds, and 
then it will turn to “ST”.
When a program is broadcast in stereo, you hear stereo 
sound. When in monaural, you hear monaural sound.

< If the sound is distorted, the signal is not strong 

enough for good stereo reception. In this case, 
change to mono mode.

“Mono” appears on the display for a few seconds, and 
then it will turn to “MO”.
To  compensate  for  weak  FM  stereo  reception,  select 
this mode. Reception will now be forced into monaural, 
reducing unwanted noise.

For the best reception, rotate the FM antenna or AM 
antenna until you get stations clearly (pages 6 - 7 

 , 

 ).