TEAC SR-80i User Manual

Listening to an External Source

See pages 6 - 7 “Connections”.

Connect a portable audio player to the AUDIO

jacks using the supplied RCA pin-stereo mini
plug cable (pages 6 - 7

Press the FUNCTION button repeatedly to

select “AUX”.

Play the source, and adjust the volume using

the VOLUME buttons and the connec ted
portable audio player.

< When using the headphones jack of the component,

if you do not adjust its volume, you might not hear
any sound from SR-80i.

< Turning the volume of the connected component

up too high might cause the sound from SR-80i to
be distorted. In this case, reduce the volume of the
component until the distortion stops and then adjust
the volume level of SR-80i to a comfortable listening
level.

The unit can be programmed to turn on and standby at a
specified time.
You can set the unit to play an iPod/iPhone, FM/AM radio
or a USB flash memory.
You can also set two separate timers with ALARM 1 and
ALARM 2.

Setting the wake up timer

The procedures below are to set ALARM 1.
Follow similar steps to set ALARM 2.

o This operation is available in every sound source.

Press and hold the ALARM 1 button for more

than 2 seconds.

Hold down

more than 2 sec.

Example:

“ON TIME” appears on the display.
The clock hour value and the wake up timer indicator
( ) blink.

o If no button is pressed for more than 10 seconds, the

wake up timer setting mode will be cancelled.

Press the Skip (. // ) buttons to set the on

time (hour), and then press the ALARM 1
button.

The minutes value blinks.

Wake Up Timer