Roberts Radio RecordR User Manual

You may store your preferred DAB and FM radio stations to the preset 
station memories. There are 10 memory presets in your radio, 5 for DAB 
and 5 for FM. Presets are remembered by your radio in the event of a 
power failure. The procedure for setting presets and using them to tune 
stations is the same for FM and DAB modes, and is described below.
 
1. Press 

the 

On / Off button to switch on the radio.

2.  Press and release the Band button to select the desired waveband.

3.  Tune to the required station as previously described.

4.  Press and hold the required Preset button 1-5 until the display shows, 

for example, 'DAB 1 Preset saved'. The station will be stored under 
the chosen preset. Repeat this procedure for the remaining presets.

5.  Stations which  have been stored in preset memories may be overwritten 

by following the above procedure.

1. Press 

the 

On / Off button to switch on the radio.

2.  Press and release the Band button to select the desired waveband.

3.  Press and release the required Preset button 1-5. The display will 

show, for example, 'Preset empty' if no station has been stored to that 
preset. If a preset has been stored, your radio will tune to the chosen 
preset station stored in the preset memory. 

 

2

4

2

3