Roberts Radio RecordR User Manual
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
020 8758 0338 (Mon-Fri)
16
Stereo / Mono setting - FM (headphones only)
Your radio will play stereo FM broadcasts in stereo (via headphones)
provided that the received signal is of adequate strength. However, as
a stereo signal becomes weaker the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order
to reduce the level of backgound hiss.
provided that the received signal is of adequate strength. However, as
a stereo signal becomes weaker the audio signal will become poorer. It
may be preferable to force the radio to play the station in mono in order
to reduce the level of backgound hiss.
1. Press the On / Off button to switch on your radio.
2. Tune to the required FM radio station as previously described (see
pages 13, 14).
3. Press and hold the Info button. The display will show 'FM Audio'.
4. Press and release the Select button. The current audio setting will
show on the display.
5. Press
the
Tuning Up or Down buttons until 'Mono' appears on the
display. Press and release the Select button. While this setting is
engaged, the radio will play the current station in mono.
engaged, the radio will play the current station in mono.
The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
radio station.
tuned station only. It is cancelled automatically by tuning to another
radio station.
6. If you wish to cancel the Mono override while listening to the currently
tuned radio station, follow steps 3 - 5 above and select 'Auto'. The radio
will then play the current station in stereo if the signal is suffi ciently
strong.
will then play the current station in stereo if the signal is suffi ciently
strong.
4,5
3
5
5