Intel SL2YM User Manual
Pentium
®
II Processor at 350 MHz, 400 MHz, and 450 MHz
Datasheet
45
5.1
S.E.C.C. Mechnical Specifications
S.E.C.C. package drawings and dimension details are provided in
Figure 18
through
Figure 27
.
Figure 18
shows all views of the Pentium II processor in an S.E.C.C. package;
Figure 19
through
Figure 22
show the S.E.C.C. package dimensions;
Figure 23
and
Figure 24
show the extended
thermal plate dimensions; and
Figure 25
and
Figure 26
provide details of the processor substrate
edge finger contacts.
Figure 27
and
Table 31
contain processor marking information.
The processor edge connector defined in this document is referred to as the “SC 242 connector.”
See the Slot 1 Connector Specification (Order Number 243397) for further details on the SC 242
connector.
See the Slot 1 Connector Specification (Order Number 243397) for further details on the SC 242
connector.
Note:
For
Figure 18
through
Figure 35
, the following apply:
1. Unless otherwise specified, the following drawings are dimensioned in inches.
2. All dimensions provided with tolerances are guaranteed to be met for all normal production
product.
3. Figures and drawings labeled as “Reference Dimensions” are provided for informational
purposes only. Reference Dimensions are extracted from the mechanical design database and
are nominal dimensions with no tolerance information applied. Reference Dimensions are
NOT checked as part of the processor manufacturing. Dimensions in parentheses without
tolerances are Reference Dimensions.
are nominal dimensions with no tolerance information applied. Reference Dimensions are
NOT checked as part of the processor manufacturing. Dimensions in parentheses without
tolerances are Reference Dimensions.
4. Drawings are not to scale.
Figure 18. Pentium
®
II Processor (S.E.C.C. Package)—Top and Side View
Left
Right
Right
Side
Left
Right
Thermal Plate
Side View
Cover Side view
Top View
Left Latch
Right Latch
Cover
Thermal
Plate
v006a.vsd