Panasonic SC-BTT190 User Manual
Reference
43
VQT4D57
Cannot charge or operate.
¾
¾
Check that the iPod/iPhone is connected
firmly. (> 22)
firmly. (> 22)
¾
The battery of the iPod/iPhone is depleted.
Charge the iPod/iPhone, and then operate
again.
Charge the iPod/iPhone, and then operate
again.
¾
When unexpected operation occurs while
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Distorted sound or noise is heard.
¾
¾
Adjust the position of the antenna.
A beat sound is heard.
¾
¾
Try to keep a certain amount of distance
between the antenna and the TV.
between the antenna and the TV.
Noise is excessive.
¾
¾
Change the audio to be output as monaural.
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
≥ To cancel, press the button again or change
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
≥ To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUTO STEREO”.
I can’t connect to the network.
¾
¾
Confirm the network connection and settings.
(> 13, 15, 34)
(> 13, 15, 34)
¾
Check the operating instructions for each
device and connect accordingly.
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾
Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
iPod/iPhone operation
Radio
Network
¾
On the “Wireless Settings” screen (> 34), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable
connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change
the position or angle of your wireless router
and see if the connection state improves. If
there is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 15) again.
continuous lighting of at least 4 “Reception”
indicators is the target for a stable
connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change
the position or angle of your wireless router
and see if the connection state improves. If
there is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 15) again.
SC-BTT190GNGSGA-VQT4D57_mst.book 43 ページ ２０１２年１月１２日 木曜日 午前９時５９分